, ,

Holybro PM02 V3 Power Module (2S-12S) for Holybro Pixhawk FC Flight Controller UAV Airplane Fixed Wing drone

Rp540.000

Ketersediaan: Stok 1

SKU: 1003600010 Kategori: , ,

Description:
This PM02 Power Module provides a simple way to supply regulated 5.2V to flight controller from the battery while providing current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable. It comes with pre-soldered wires, capacitor, and XT60 connector on both ends, along with shrink tubing on the PCBA for physical protection.

Specification:
Input Voltage: 2S-12S
PCB Cont. Current Rating: 60A
PCB Burst Current Rating: 100A (Max Current Sensing: 120A
Output: DC 5.2V & 3A Max
Voltage Divider: 18.182
Amperes per Volt: 36.364
Weight: 20g

Please Note:
* The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference.
* This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D).

Package Includes:
* 1x Power Module with XT60 Connectors Board (pre-soldered)
* 1x Electrolytic capacito: 220uF 63V (pre-soldered)
* 1x Molex 6 Position Connector 15 cm
* 1x JST GH 6 Position Connector 15 cm

Berat 100 gram

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Holybro PM02 V3 Power Module (2S-12S) for Holybro Pixhawk FC Flight Controller UAV Airplane Fixed Wing drone”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Keranjang Belanja
Holybro PM02 V3 Power Module (2S-12S) for Holybro Pixhawk FC Flight Controller UAV Airplane Fixed Wing droneHolybro PM02 V3 Power Module (2S-12S) for Holybro Pixhawk FC Flight Controller UAV Airplane Fixed Wing drone
Rp540.000

Ketersediaan: Stok 1