Specifications
Camera/VTX Options: DJI O3 Compatible (No Camera or VTX), DJI O3, Walksnail Avatar HD Lite, or HDZero Nano Lite
Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
Size: 120mm*120mm*50mm
Brand Name: Happymodel
Wheelbase: 85mm
FLIGHT CONTROLLER
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 470
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
Power supply: 1-2S battery input (DC 2.9V-8.7V)
GYRO Sensor: BMI270 (SPI connection)
Built-in 12A(each) Blheli_S 4in1 ESC
Mount hole size: 25.5mm*25.5mm
Built-in Serial ExpressLRS 2.4G
Model: Crazy F405 ELRS HD
Built-in BMP280 Barometer
Built-in 8MBp black box
ONBOARD UART ELRS 2.4GHZ RECEIVER
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
Could update firmware via ExpressLRS configurator
Antenna: enameled copper wire 31mm length
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Telemetry output Power: <12dBm
RF Frequency: 2.4GHz
ONBOARD 4-IN-1 ESC
Current: 12A continuous peak 15A (3 seconds)
Factory firmware: Bluejay ESC V0.19
Support BLHeli_S Bluejay firmware
Power supply: 1-2S LiPo/LiPo HV
Default protocol: DSHOT300
Firmware target: Z-H-30
*When using 1s battery and high KV 0702/0802 motors, should set the startup power to 1100/1200
MOTORS
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
Mode: EX1103 KV11000
Shaft Diameter:Φ1.5mm
No.of Cells(Lipo):1-2S
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Weight(g):3.8g
PROPELLERS
Center Hole Dia:1.5mm
Center Thickness:5mm
Props Dia:52.17mm
Weight:0.88g
Pitch:2.3inch
Material: PC
Recommended (Not Included)
2S Battery: 450mah/550mah/650mah
Ulasan
Belum ada ulasan.