Bullet Points
* A true diversity receiver with two complete RF receiver chains (referring to dual SX1280/SX1281 or dual SX1276), based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
* Ultralight weight is only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
* Two Dipole T antennas will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far apart as possible to get a better signal is recommended.
* Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long-range flying.
* The first true diversity receiver for the 915MHz/868MHz frequency bands, with two separate receiving modules working together to improve signal reception quality and overall reliability.
* The 900MHz radio system exhibits greater diffraction ability due to its lower frequency, while the 2.4GHz systems tend to be directional and susceptible to attenuation caused by buildings, foliage, or moisture.
Specification
* Item: BETAFPV SuperD ELRS 2.4GHz Diversity Receiver
* MCU: ESP32 PICO D4, dual SX1280(SX1281) (2.4GHz) / dual SX1276 (915MHz/868MHz)
* Telemetry power: 20dBm (2.4GHz) / 17dBm (915MHz/868MHz)
* Weight excluding antenna: 1.1g (2.4GHz) / 1.2g (915MHz/868MHz)
* RF Frequency: 2.4GHz (ISM) / 915MHz FCC/868MHz EU
* Antenna connector: IPEX MHF 1/U.FL
* Input voltage: +5V DC @ “+” pad
* Receiver protocol: CRSF
* PCB size: 22mm x 14mm
Package :
SuperD ELRS 2.4G Diversity Receiver :
1* SuperD 2.4GHz Diversity Receiver
2* 2.4GHz T Antenna
1* 4-Pin Header
1* 4-Pin Wire Harness
1* Instruction Manual
2* Heat Shrink Tubing
Ulasan
Belum ada ulasan.