BetaFPV Matrix 1S Brushless Flight Controller G4 5IN1 V2 FC Quad FPV Drone

Attention

* Flight controllers are covered for manufacturer defects. Issues arising from user errors, physical crash damage, damage during installation or dismantling, modifications, power surges, electrical fires, or water exposure are not covered.

* VTX Power: Higher VTX power consumes more energy and generates more heat, reducing flight time. For better flight time in indoor scenarios, use 25~100mW power.

* VTX Antenna: Connect and install the image transmission antenna before powering on the flight control. Alternatively, set transmission power to 0 to avoid burnout.

Bullet Points

* All-in-One Integration: Combines the FC, ESC, OSD, Serial ELRS 2.4GHz RX, and a 5.8GHz 400mW VTX into a single, compact unit.

* Upgraded 12A Continuous ESC: Delivers 12A continuous current (18A peak) for powerful propulsion.

* Enhanced Durability: Features a robust 3-point mounting system and a 1.0mm thick PCB to absorb crash impacts and protect core components.

* Flexible Build Options: Available in both Solder-free and Solder-required versions to suit any skill level or weight preference. Features larger solder pads for easier, more reliable custom wiring.

* Advanced Core Components: Built around a powerful G473 processor for precise racing and complex freestyle maneuvers.

* Optimized Layout: A refined component arrangement improves durability and overall reliability.

Specifications

FC

* MCU: STM32G473CEU6

* Gyro: ICM42688P / ICM42622 / LSM6DSV16X / LSM6DSK320X

* Blackbox memory: 16MB

* Sensor: Voltage & Current

* BEC: 5V, Max 3A

* UART: UART 1, UART 2 (For VTX), UART 3 (For RX), UART 4

* BetaFlight OSD: AT7456E

* ESC: 12A continuous

* RX:Serial ELRS 2.4GHz (V3.4.3)

* VTX: 5.8GHz 48 channels, Max 400mW

* FC firmware: Betaflight_4.5.3_BETAFPVG473_V2

* USB port: SH1.0-4Pin

* Motor connector: JST1.25

* Battery connector: BT2.0

* Mounting hole size: 26mm x 26mm

* Weight: 4.1±0.1g (solder-free), 3.76g (soldered-required)

ESC

* Power input: 1S Only

* Current: 12A continuous, 18A peak

* ESC firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay firmware

* Digital signal protocol: DShot300, DShot600

VTX

* Output power: 25/100/200/400/PIT

* Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz

* Channel SEL: SmartAudio2.0

* Modulation type: FM

* Frequency control: PLL

* All harmonic: Max -50dBm

* Frequency stability: ±100KHz (Typ.)

* Frequency precision: ±200KHz (Typ.)

* Channel carrier error: ±1.5dB

* Antenna port: 50 Ω

* Operating temperature: -10℃~80℃

Package

Matrix 1S 5IN1 II Brushless Flight Controller (Solder-free Version) (Versi tidak perlu disolder/menggunakan plug untuk bagian motornya)

1 * Matrix 1S 5IN1 II Brushless Flight Controller (Solder-free Version)

1 * Type-C to SH1.0 Adapter

1 * SH1.0-4Pin Adapter Cable

1 * 5.8G Antenna

4 * M1.2*4 Self-tapping Screws

4 * M1.4*5 Self-tapping Screws

4 * Shock Absorbing Balls