Pixhawk Herelink HD Video Transmission Drone FPV Video Transmitter

Pixhawk Herelink HD Video Transmission Drone FPV Video Transmitter, Herelink adalah remote kontrol terintegrasi, stasiun bumi dan sistem transmisi digital nirkabel yang dirancang untuk digunakan dengan Cube Autopilot, Ardupilot atau PX4. Herelink memungkinkan kontrol RC, video HD, dan data telemetri ditransmisikan hingga 20km antara stasiun bumi dan unit udara, pengontrol jarak jauh Herelink menampilkan aplikasi Solex TX dan QGC khusus dan unit udara dan stasiun bumi memiliki fitur SOC 8 inti terintegrasi untuk aplikasi khusus perkembangan.

Features
Supports dual HDMI 1080P 60fps video input, which can be modified through the QGC interface.
Dual S.bus signal output for simultaneous control of autopilot and pan/tilt cameras.
The integrated digital transmission and image transmission can simultaneously transmit the flight data of the autopilot and the image output by the camera to the remote controller.
Built-in QGC open source ground station with adaptable apm and px4 firmware for direct flight function.
Independent Mavlink commands camera buttons and scroll wheel channels.
Custom channel button and PWM value assignment.

Technical specifications
Air Unit:

Appearance: core board + video daughter board + structure of RF daughter board
Among them, the video daughter board completes the input bridge function of theHDMI signal.
The RF daughter board completes the function of transmitting and receiving signals
M2 (E) connector connection between daughter board and core
Size: 78.5x30x13mm
Micro HDMI x 2: Input for external camera video signals
2 Pin interface x 1:5V-12V power input interface
3 Pin interface x 1:3.3V / 5V level UART interface
4 Pin interface x 1 : Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control)