Pixhawk Cube Orange+ Standard Set (IMU V8)

“Hubungi admin untuk ketersediaan stok dan dapatkan penawaran menarik!!!” ☺️🔥

*Specifications:
Chassis Material: CNC Aluminum Alloy (cube) + ABS Molding (Carrier Board)
Operating Temperature: 10~ +55° IMU with temperature control
PWM I/Os: 14
Mavlink serial Interface: 2
Number of GPS supported: 2
Debug Interface: 1
I2C Interface: 1
CAN FD Interface: 2

*Protection Function:
Smart RTL
Battery low protection
Geo-Fencing
RC signal protection

*Hardware :
Main Processor: STM32H753VIT6
Coprocessor: STM32F100
Supported RC signals: PPM / SBUS / DSM
Power redundancy: Triple redundancy
Sensors: Triple IMU System
Supported firmware: Ardupilot and PX4 opensource flight controller firmware
Supported vehicle type: Fixed-wing planes, Copters with 3-8 motors, Helicopters, VTOL planes, Rovers/boats/submarines
Weight: 73 g

*Features
Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
Power input voltage/rated input current: 4.1-5.7 V / 2.5 A
Power-rated output/input power: 14 W
USB port input voltage/rated input current: 4-5.7 V / 250 mA
Servo rail input voltage: 3.3 V / 5 V
Not waterproof. External waterproof protection is needed
Operation Temperature: -10 °C / 55 °C
Cube Orange+ Housing Material: CNC Aluminum Alloy
ADSB Carrier Board Housing Material: ABS Molding

*Includes
1x Cube Orange+
1x ADSB Carrier Board
1x Power Brick Mini
1x I2C Board
1x Buzzer Cable
2x CAN Cable
1x Power Brick Mini Cable
1x GPS1 Cable
1x Micro USB Cable
2x I2C Cable
4x Mounting Screw
3x 3M Large Sticker
2x 3M Medium Sticker
4x 3M Small Sticker