Bullet Point
* Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.
* It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly.
* The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
* The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
* Redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning.
* It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.
Specification
* Weight: 5.58g (without motor connectors and power cable),5.92g (with motor connectors)
* Mounting Hole Size: 26mm x 26mm
* CPU*: STM32F405RGT6 (168MHz)
* Six-Axis: ICM42688P (SPI connection)
* RX: Serial ELRS 2.4G Receiver
* RX firmware version: BETAFPV AIO 2400 RX ELRS V3.3.0
* Antenna: Enameled wire
* Blackbox Memory: 16MB
* Sensor: Barometer (BMP280/DSP310), Voltage & Current
* 5V BEC*: 5V 3A@8V supply
* 9V BEC*: 9V 2A@8V supply
* USB Port: SH1.0 4-Pin
* Built-in ESC with 20A continuous and peak 25A current
* ESC input voltage: 2-3S
* FC firmfware version: Betaflight_4.4.1_BETAFPVF405
* ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware
* Signal support: D-shot300, D-shot600
*The output current of BEC will decrease as the temperature increases
Package
1 * F4 2-3S 20A AIO FC V1
4 * M2*10 Machine Screw
4 * M2*10 Nylon Screw
4 * M2 Nuts
4 * Shock Absorbing Ball
4 * JST1.25mm Angle Socket
4 * JST1.25mm Straight Socket
1 * SH1.0 4Pin Adapter Cable
1 * Type-C to SH1.0 Adapter
1 * XT30 Power Cord
1 * Filter Capacitor
1 * 30mm Double-head VTX connector wire
1 * 60mm Single-head VTX connector wire
Ulasan
Belum ada ulasan.